Ultra Wide Band Antenna Antenna Distribution System with Five Way Switchable Frequency Ranges

Model: UA845UWB

5 Selectable Frequency Ranges The UA845UWB allows more options for avoiding intermodulation artifacts by switching between one of the five frequency bands.
RF Power LED Indicators Front panel LED indicators display red if RF power is overloading.
Expandability The UA845UWB Antenna Distribution System is designed for large wireless systems. Each unit allows up to four wireless receivers to use the same two antennas, and the cascade ports allow connection to a fifth receiver or a second UA845UWB.
Compatibility The UA845UWB is compatible with all Shure wireless microphone receivers operating within a compatible frequency range.
Cascade Ports Two 50 ohm, BNC-antenna cascade ports allow an additional UA845UWB unit or a fifth wireless receiver. A large wireless system can be run off of a single pair of antennas.

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The Shure Model UA845UWB Antenna Distribution System allows up to four receivers to use the same set of antennas. There are also power connectors for distributing power to each receiver. RF signal amplification compensates for insertion loss from splitting the antenna input to multiple outputs. Cascade connectors allow connections to a fifth receiver or a second UA845UWB. A button on the front panel switches between one of five frequency bands from 174 to 1805 MHz.

5 Selectable Frequency Ranges The UA845UWB allows more options for avoiding intermodulation artifacts by switching between one of the five frequency bands.
RF Power LED Indicators Front panel LED indicators display red if RF power is overloading.
Expandability The UA845UWB Antenna Distribution System is designed for large wireless systems. Each unit allows up to four wireless receivers to use the same two antennas, and the cascade ports allow connection to a fifth receiver or a second UA845UWB.
Compatibility The UA845UWB is compatible with all Shure wireless microphone receivers operating within a compatible frequency range.
Cascade Ports Two 50 ohm, BNC-antenna cascade ports allow an additional UA845UWB unit or a fifth wireless receiver. A large wireless system can be run off of a single pair of antennas.
Power Output and Out Connectors Multiple receivers can be daisy-chained and powered from a single source via the power output connectors.
Low Noise and Intermodulation Distortion The UA845UWB maintains clean signals with minimal distortion.
Insertion Loss Compensation Whenever a signal is split to multiple output ports, there is a loss in signal strength. The UA845UWB amplifies signals to compensate, ensuring a strong signal to the receivers.
Front-Mounted Antennas The UA845UWB comes with hardware to front-mount the antennas, if desired.
System Components
UA845UWB Antenna/Power Distribution System
(4) Locking DC power cords (ULXD4)
(4) Non-locking DC power cords (QLXD4, SLX4, BLX4R)
(10) 22 in. BNC cables
(2) 6 ft. BNC cables
(2) Bulkhead adapters for front mounting antennas
(1) AC daisy-chain cord
(1) AC power cord
Rack-mounting hardware

Antenna Directivity - Omnidirectional

Operating Temperature (Maximum): 145.40 F
Operating Temperature (Minimum): -0.40 F
Certifications: CE
Gain (sound): 2 dB
Impedance: 50 ohm
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 14.10 Watt
Current Draw: 2.50 Amps
DC Voltage: 15 Volts
Depth: 23.44 in
Height: 2.75 in
Shipping Depth (with packaging): 24 in
Shipping Height (with packaging): 7.25 in
Shipping Width (with packaging): 18.50 in
Width: 17.55 in
Product Weight: 5.85 lbs
Shipping Weight: 28.16 lbs
Carrier Frequency Range: Band 1 - 174 to 216 MHz, Band 2 - 470 to 960 MHz, Band 3 - 1240 to 1260 MHz, Band 4 - 1492 to 1525 MHz, Band 5 - 1785 to 1805 MHz
Distributed Output Level (Gain): Receiver Antenna Input, Output Ports1 to 4, -2 dB to +2 dB Receiver Antenna Input, Cascade Output -1 dB to +1
Output Connector Isolation: >25 dB, typical
Third-order Overload Intercept Point (OIP3): 24 dBm, typical
connector type: BNC

AD4QNP=-A - Quad Channel Digital Wireless Receiver with 470 to 636 MHz

AD4QNP=-B - Quad Channel Digital Wireless Receiver with 606 to 810 MHz

AD4QNP=-C - Quad Channel Digital Wireless Receiver with 750 to 960 MHz

ULXD6/C=-J50A - Cardioid Boundary Microphone Transmitter with 572 to 608 MHz Frequency Range

ULXD6/O=-J50A - Omnidirectional Boundary Microphone Transmitter with 572 to 608 MHz Frequency Range

ULXD8=-J50A - Wireless Gooseneck Base Transmitter with 572 to 608 MHz Frequency Range

Antenna Distribution System 964649 kb - Instructions

Project List

Midtown Video, Inc
4824 SW 74 Court
Miami, FL 33155
USA
(305) 669-1117

Contact in regards to this product:

Shure Incorporated

Model: UA845UWB