Network Equipment : Gateways : Imagine Communications - IPS6800+D

SDI to IP Encapsulator IP Video Gateway Module

Model: IPS6800+D

Bidirectional transmission of SDI to and from IP
Two independent transmit and receive channels
Simultaneously send or receive in either direction without interference
Add forward error correction (FEC) for robust data transmission
Transmit or receive IP unicast or m ulticast video streams

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The IPS6800+D IP video gateway module is an extension of the comprehensive set of line cards in the 6800+ modular platform.

The IPS6800+D links traditional SDI-based video plants through modern Gigabit Ethernet networks and provides a cost-effective alternative to other, more expensive, links such as satellite or ATM.

Take advantage of an existing Gigabit Ethernet network by transporting high-quality uncompressed SDI signals to multiple locations over a wide area network (WAN).

Extend coaxial by carrying uncompressed SDI signals from source to destination over IP, and have the extra protection of Pro MPEG COP-4 forward error correction (FEC) to guard against possible network shortcomings.

Bidirectional transmission of SDI to and from IP
Two independent transmit and receive channels
Simultaneously send or receive in either direction without interference
Add forward error correction (FEC) for robust data transmission
Transmit or receive IP unicast or m ulticast video streams
Control using CCS™ Protocol and over IP
Encapsulate up to two uncompressed SDI (SMPTE 259M) video signals into RTP packets and transmit them over IP
De-encapsulate uncompressed SDI (SMPTE 259M) streams from an IP transport

ROHS Compliant - Yes

Operating Temperature (Maximum): 113 F
Operating Temperature (Minimum): 41 F
Certifications: CE, FCC, UL
Number of Channels: 2
Active Power: 12 Watt
10/100/1000Base-T Electrical Interface:
- Differential Output Voltage: 0.75 V ±0.83 dB
- High Frequency Jitter (maximum): 0.3 ns
- Clock Frequency: 125 MHz ±0.01%
- Common Mode Rejection: 1 V RMS 1 to 250 MHz
SDI Digital Video Input:
- Formats: SDI (ANSI/SMPTE 259M–C1997)
- Jitter Tolerance: Meets SMPTE RP184 specifications
- Rate: 270 Mb/s
- Sampling: 8-bit or 10-bit 4:2:2 component
- Connector: 75 ohms BNC
- FEC Type: Pro-MPEG code of practice 4
Serial Video Output:
- Number: 2
- Standards: SMPTE 259M-C; 270Mb/s, 525/625
- Component Connector: BNC per IEC 169-8
- Impedance: 75 ohms
- Return Loss: 18 dB to clock frequency
- Signal Level: 800 mV ±10%
- Rise and Fall Time: 0.40 to 1.5 ns as per SMPTE 259
- Overshoot: <10% of amplitude (all outputs terminated)
- Jitter: <0.2 UI (740 ps) pk-pk