Video Production Equipment : Video Keyers : Evertz - AN9725LG

Logo Inserter System

Model: AN9725LG

Multiple simultaneous logos can be keyed directly into composite analog video
Stores and inserts static or animated logos
Incorporates a linear keyer that provides various transparency levels to your logos
Provides independent fade rates for each logo
32 programmable GPI contact closures

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The AN9725LG Logo Keyer system is a complete analog logo insertion package that will key one, or many, static/animated "bugs" over a composite analog video signal. Logos created in BMP, Tiff and TGA file formats can be imported into the Evertz software and transferred to the AN9725LG via Ethernet.Logos are stored in flash memory and can be quickly accessed via front panel, quick select keys, GPI inputs, automation and. With the removable Compact Flash option you can have access of up to 2 Gigabytes of on-line logo storage space and virtually unlimited archived media storage.

Multiple simultaneous logos can be keyed directly into composite analog video
Stores and inserts static or animated logos
Incorporates a linear keyer that provides various transparency levels to your logos
Provides independent fade rates for each logo
32 programmable GPI contact closures
16 programmable GPO outputs
Download media from a standard Windows PC running
EAS supports all new alert codes including child abduction emergency
FTP file transfer and maintenance using software
Fade all out capability provided on program video output
Program output bypass relay protected
Matches logo to input video ±3dB range
Can correct video levels ±3dB
Standard 512MB flash storage with 512MB playout cache
Multi-layer keying
Preview/Program or key/fill output modes
Optional 2GB internal flash storage space
Optional additional removable memory 2GB compact flash storage
Optional rackmount or desktop remote control panels
Optional EAS crawl support for Sage, TFT and DAS DEC Decoders
Optional TXT for scrolling and dynamic text titling
Optional redundant power supply
SDI upgrade by factory retrofit
Up to 2GB Playout memory options

Spec Sheet available - Yes

Memory (RAM) Required: 2 GB
Number of Video Inputs: 16
Number of Video Outputs: 8
AC Voltage: 240 Volts
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 40 Watt
DC Voltage: 12 Volts
Depth: 18.78 in
Height: 1.77 in
Width: 19.02 in
Color: Black
Standard: SMPTE ST 170 (NTSC), ITU-R BT.470 (PAL-B)
Number of Inputs: 1
Connector: BNC per IEC 61169-8 Annex A
Impedance: 75 ohm
Return Loss: > 40dB up to 4.2MHz
Number of Outputs: 2 Program, 1 Preview
Signal Level: 1V nominal
DC Offset: 0V ±0.5V
Frequency Response: < 0.1dB to 5.5MHz for Program
Differential Gain: 0.25% p-p
Differential Phase: 0.22° p-p
SNR: > 65dB (black video, 100kHz to 5.0MHz)
Frame Rate: 25Fps and 30Fps nominal
Connectors: 3-pin female XLR type connector
Level: 0.2V to 4V p-p, balanced or unbalanced
Upgrade 232 Port: 9 pin female "D", RS-232 57600 baud, 8 bits, no parity firmware upgrade
Remote Panel Port: 9 pin female "D", RS-422 9600 baud, 8 bits, no parity
Serial control port: 9 pin female "D", RS-232/422 8 bits, no parity, baud rate depends on protocol
Selectable protocols: Automation, EAS Interface, temperature probe interface
Media Transfers: RJ-45 1000Base T Ethernet, TCP/IP
Type: Opto isolated, active low
Rack Mount Control Panel WxHxD: 19 x 1.75 x 4.25 inch (483 x 45 x 110)
Desktop Control Panel WxHxD: 7.75 x 2.0 x 6.5 inch (197 x 50 x 160)

Logo Inserter System 175 kb - Data Sheet

Project List