Fiber Optic Systems : Fiber Optic Receivers & Transmitters : Evertz - 7707VT-8-HS+Dxxx

evertz

8x 3G/HD/SDI/DVB-ASI Fiber Transmitter, VistaLINK® DWDM XFP

Model: 7707VT-8-HS+Dxxx

Single card TDM multiplexer for 3 3G-SDI, 7 HD-SDI or 8 SDI-SDI/DVB-ASI signals
Signal transport over fiber uninterrupted by loss of any HD-SDI, SDI, SDTi or DVB-ASI input feed
Transparently passes embedded AES or any other data in the horizontal or vertical ancillary data space
Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
Monitoring output of any input

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

These 8x 3G/HD/SDI/DVB-ASI fiber transmitter transparently passes embedded AES or any other data in the horizontal or vertical ancillary data space. It monitors output of any input. Supports single-mode fiber optic cable.

Single card TDM multiplexer for 3 3G-SDI, 7 HD-SDI or 8 SDI-SDI/DVB-ASI signals
Signal transport over fiber uninterrupted by loss of any HD-SDI, SDI, SDTi or DVB-ASI input feed
Transparently passes embedded AES or any other data in the horizontal or vertical ancillary data space
Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
Monitoring output of any input
Main module fully hot-swappable from front of frame
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
Automatic coaxial input equalization up to 70m at 2.970Gb/s, 100m at 1.485Gb/s and 250m at 270Mb/s (Belden 1694A)
Supports single-mode fiber optic cable
Optical output wavelengths of 1310nm and 1550nm and CWDM wavelengths (ITU-T G.694.2 compliant)
DWDM wavelengths (ITU-T G.694.1 compliant) also available
Female LC Duplex Connector
Occupies two card slots and can be housed in the 3RU 7800FR frame which has a 15 slot capacity, or the portable 3RU 350FR frame which has a 7 slot capacity

Fiber Optic Signals Supported - Other
Spec Sheet available - Yes

Active Power: 20 Watt
DC Voltage: 12 Volts
Serial Video Input::
Number of Inputs: 8
Standard: SMPTE ST 424, SMPTE ST 292-1, SMPTE ST 259-C, DVB-ASI, SDTi
Connector: 4 BNC per IEC 61169-8 Annex A
Equalization: Automatic to 70m at 2.970Gb/s, 100m @ 1.485Gb/s and 250m @ 270Mb/s with Belden 1694A or equivalent cable
Return Loss: > 15dB up to 1.5Gb/s
Serial Video Output::
Number of Outputs: 1, loopback signal user-selectable from above 7 inputs (dual purpose I/O from output 8)
Standards: SMPTE ST 424, SMPTE ST 292-1, SMPTE ST 259-C, SMPTE ST 305.2
Signal Level: 800 mV nominal
DC Offset: 0 V ±0.5V
Rise and Fall Time: < 270ps at 1.485Gb/s and 900ps nominal at 270Mb/s
Overshoot: < 10% of amplitude
Alignment Jitter: < 0.2 UI
Optical Output::
Return Loss: > 12 dB
Rise and Fall Time: 200 ps nominal
Fiber Size: 9µm core/125mm overall
Physical::
Number of Slots: 2

8x 3G/HD/SDI/DVB-ASI Fiber Transmitter 64 kb - Data Sheet

Project List

AV-iQ Terms and Conditions | | Powered by AV-iQ