Fiber Optic Systems : Fiber Optic Converters : Evertz - 7707EODxxx-DS3

Evertz - 7707EODxxx-DS3

evertz

DS3 (45Mb/s) Electrical to Optical Converter, DWDM Laser, +7dBm, VistaLINK®

Model: 7707EODxxx-DS3

Electrical to optical converter for DS3 (44.736Mb/s)
Automatic cable equalization for up to 300m of high quality 75? coaxial cable
Signal reclocking and jitter attenuation
Output wave shaping for G.703 standards compliance
Loss of signal (LOS) detection/indication (ANSI T1.231-1999 and ITU G.775)

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

DS3 (45Mb/s) Electrical to Optical Converter, DWDM Laser, +7dBm, VistaLINK®.

Electrical to optical converter for DS3 (44.736Mb/s)
Automatic cable equalization for up to 300m of high quality 75? coaxial cable
Signal reclocking and jitter attenuation
Output wave shaping for G.703 standards compliance
Loss of signal (LOS) detection/indication (ANSI T1.231-1999 and ITU G.775)
Electrical output drive level control for enhanced distance
Transformer coupled inputs/outputs
DWDM wavelengths (ITU-T G.694.1 compliant) also available
Supports single-mode and multi-mode fiber optic cable (contact factory for multi-mode applications)
Fully hot-swappable from front of frame
Occupies one card slot and can be housed in a 1RU frame that will hold up to 3 modules, a 3RU frame that will hold up to 15 modules, a 350FR portable frame that will hold up to 7 modules or a standalone enclosure which holds 1 module
Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
VistaLINK® capability is available when modules are used with the 3RU 7800FR or 350FR frame and a 7700FC VistaLINK® Frame Controller module in slot 1 of the frame

Spec Sheet available - Yes

DC Voltage: 12 Volts
Regulatory Compliance: Complies with 24CFR 1040.10 and 1040.11, IEC 60825-1, FCC Part 15, EU EMC Directive
Input Standard: G.703 @ 44.736Mb/s
Number of Inputs: 1 isolated
Input Connector: BNC per IEC 61169-8 Annex A
Input Equalization: Automatic to 300m with Belden 8281 or equivalent cable
Input Return Loss: > 20dB up to 44Mb/s
Output Standard: G.703 @ 44.736Mb/s
Number of Outputs: 2 reclocked
Output Connector: BNC per IEC 61169-8 Annex A
Output Waveform: Conforms to G.703 compliant masks
Output Return Loss: > 15dB up to 44.736Mb/s
Output Drive Level: Low for cable lengths < 70m or High for cable lengths > 70m
Optical Type: Scrambled DS3 @ 44.736Mb/s
Optical Connector: SC/PC, ST/PC, FC/PC Female Housing
Optical Return Loss: > 14dB
Optical Fiber Size: 9µm core / 125µm overall
Optical Wavelength: 1561.42 to 1529.55 Nm
Optical Power: DWDM DFB +7dBm ±1dBm
Power: 9 W
Number of Slots: 1

SDI Electrical to Optical Converter 55 kb - Data Sheet

Project List

AV-iQ Terms and Conditions | | Powered by AV-iQ