Pro AV Catalog
Crestron Electronics, Inc. - HD-EARC KIT
Crestron Electronics, Inc. - HD-EARC KIT Crestron Electronics, Inc. - HD-EARC KIT Crestron Electronics, Inc. - HD-EARC KIT Crestron Electronics, Inc. - HD-EARC KIT Crestron Electronics, Inc. - HD-EARC KIT
Request Quote
All Products
crestron-electronics

DM® Essentials 4K60 4:4:4 eARC Transmitter/Receiver Kit for HDMI®, RS-232, IR, and Analog Audio Signal Extension over CATx Cable

Model: HD-EARC KIT

Part #: 6513078

  • 4K video with 4:4:4 color sampling
  • Transmitter and receiver for extension of an HDMI® AV signal and eARC or optical digital audio signals over a CAT5e or greater cable
  • eARC support available on HDMI® connection to display - supports all Dolby® audio formats up to Dolby Atmos® and all DTS® formats up to DTS:X®
  • Video, audio, and power extension over a CAT5e (or greater) cable - up to 230 ft (70 m) for resolutions up to 2K or up to 130 ft (40 m) for higher resolutions up to 4K
  • HDCP 2.3 compliant
Compare
Project List
Product Info
Tech Specs
Documents

The HD-EARC KIT consists of a transmitter (HD-TXC-EARC) and receiver (HD-RXC-EARC), which enable the extension of HDMI® AV and eARC (Enhanced Audio Return Channel) or optical digital audio signals. This is useful in applications where an AV source is located remotely from its destination, such as a display, projector, or codec solution. A CAT5e or greater twisted pair cable must be used to connect the transmitter and receiver.

4K60 4:4:4 and HDR Support

The HD-EARC KIT supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported1.

eARC and S/PDIF Audio Extraction

The HDMI output of the HD-RXC-EARC receiver supports Enhanced Audio Return Channel (eARC) connectivity, allowing audio to be extracted from a connected display and transmitted back to the HDMI connector of the HD-TXC-EARC transmitter. Extracting audio from the display via the eARC connection means only a single cable is required for video and bidirectional audio. An optical TOSLINK® S/PDIF input is also available on the receiver to extract 2-channel LPCM digital audio from the display. These connections allow local audio content from the display (such as smart TV streaming applications) to be sent back to the transmitter. The HDMI/OPTICAL switch on the transmitter determines which audio output connection on the HD-TXC-EARC is prioritized.

Compact, Surface-Mountable Design

Compact in design, the transmitter and receiver of the HD-EARC KIT can be mounted onto a flat surface such as a wall behind a flat-panel display or on a ceiling above a projector. They can each also be attached to a single rack rail in the back of an equipment cabinet. The power pack supplied with the HD-TXC-EARC transmitter powers both units in the kit.

  • 4K video with 4:4:4 color sampling
  • Transmitter and receiver for extension of an HDMI® AV signal and eARC or optical digital audio signals over a CAT5e or greater cable
  • eARC support available on HDMI® connection to display - supports all Dolby® audio formats up to Dolby Atmos® and all DTS® formats up to DTS:X®
  • Video, audio, and power extension over a CAT5e (or greater) cable - up to 230 ft (70 m) for resolutions up to 2K or up to 130 ft (40 m) for higher resolutions up to 4K
  • HDCP 2.3 compliant
  • RS-232, IR, EDID, and Consumer Electronics Control (CEC) pass-through capability
  • Low-profile installation
  • 100-240VAC power pack included
 
Request Quote
 
Go to Top