Signal Processing Systems : Converters : Matrox Video - CIP-DRH

ConvertIP Dual-channel RJ45 HDMI-to-IP Converter

Series: ConvertIP

Model: CIP-DRH

HDMI I/O
Multi-network support
3x RJ45 1G network support
Fanless design for quiet cooling
Power redundancy through PoE+ and locking AC power connector (optional power supply cable sold separately)

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Videos

Matrox ConvertIP DRH is a compact, standalone input/output device capable of receiving or transmitting ST 2110 or IPMX signals. Featuring HDMI I/O and three RJ45 ports on a single device, ConvertIP DRH is designed for 1G AV workflows and is optimal for an ultra-low latency experience. The device can deliver power over Ethernet through its RJ45 connection, or it can be powered through an optional power supply unit. Both can be used simultaneously to deliver power redundancy.

HDMI I/O
Multi-network support
3x RJ45 1G network support
Fanless design for quiet cooling
Power redundancy through PoE+ and locking AC power connector (optional power supply cable sold separately)
Optional bracket for VESA mounting behind monitors
Optional 1 RU rack shelf that holds two appliances
Optional fault-tolerant hot-swappable rack-mountable power supply
Single device can be configured as a transmitter or receiver
Imperceptible latency with exceptional 4K image quality
Optional JPEG XS license
IPMX ready
Complimentary web interface for centralized management of ConvertIP devices
Optional Matrox ConductIP software license for discovery and routing
Compact form factor mounts easily to the back of a monitor

Converter Signal Types - Audio & Video
Converter Type - Up/Down Converter
Rackmountable - Yes
ROHS Compliant - Yes
Warranty - Yes
Spec Sheet available - Yes

Warranty (Length/Type): 3 Years
Certifications: EU, REACH, CE (EU), FCC (USA), ICES-003 (Canada), KC (Korea), RCM (Aus/NZ)
Operating Temperature (Maximum): 113 F
Operating Temperature (Minimum): 32 F
Current Draw: 0.50 Amps
AC Voltage (Minimum): 100 Volts
AC Voltage (Maximum): 240 Volts
Active Power: 18 Watt
Depth: 7.13 in
Height: 1.42 in
Width: 7.53 in
Product Weight: 1.40 lbs
Color: Black
Form Factor: Standalone appliance, Rack-mountable: 1U, 1/2 rack (horizontal)
Video Input: 1x HDMI
Video Input Resolutions: HD and 4K broadcast resolutions
Video Outputs: 1x HDMI (zero latency pass-through in Tx mode)
Audio Input/Output: Up to 8 channels of audio embedded in HDMI signal, Unbalanced analog stereo input via 1/8“ (3.5mm) jack, Line Level
Network Connector: 3x RJ45 (LAN 1 for Media and Control with PoE, LAN 2 for Media and Control (redundant), Control LAN for Control data)
RS-232: Yes
Control and management: Web browser-based UI, standalone utility
Maximum Video Resolutions: 4096 x 2160 60p
Color Space: YUV 4:2:0 10-bit1 and 8-bit2, YUV 4:2:2 10-bit3, RBG 4:4:4 8-bit, SDR/HDR4
Video Scaling: High Quality multi-tap 10-bit Up/Down Scaler
Video Deinterlacing: Yes
Color Space Conversion: Yes
HDCP Support: Yes
Video: ProAV 4:4:4 8-bit codec; HD 200 Mbps, 4K 800 Mbps, Optional: JPEG-XS 4:2:2 10-bit; HD 400 Mbps, 4K 1.6 Gbps, Bitrates vary based on resolution
Audio: Uncompressed PCM (~1 Mbps/ch)
Latency: Less than a 1/4 frame (<4 ms)
Network Standard: RJ45 providing 1 GbE or 2.5 GbE Base-T Ethernet
IP addressing: IPv4, IPv66, DHCP (default) and static IP
Supported Protocols: SMPTE ST 2110 (-10, -20, -21, -30, -31, and -40), SMPTE ST 2059-2, SMPTE ST 2022-7
Redundancy: Yes (ST 2022-7)
Command and Control: HTTPS over TCP
Discovery, Registration and Control: NMOS discovery and control according to standards IS-04 v1.3 and IS-05 v1.1
PoE+: Yes (IEEE 802.3at Type 2)
Cooling: Fanless
Hardware included: ConvertIP DRH appliance
Optional Hardware: ConductIP NMOS-based routing solution (Part #: CDCTIP-SERV)
Accessories (sold separately): ConvertIP power supply unit (Part #: EPS40WKIT-NA, EPS40WKIT-EU, EPS40WKIT-UK, EPS40WKIT-AU, EPS40W-10PK8 ), Rackmount kit9 (Part #: RMK-19TR-A), Angled bracket kit (Part #: RMK-6BRKT-A), Secure cable solution for HDMI (Part #: SK-SLND-4), NRG redundant power supply unit (Part #: NRG-5-1DB or NRG-5-2DB)
Software: Matrox ConvertIP Command Center (Web UI), Matrox ConvertIP Manager (Microsoft® Windows® 10)
Optional Software: JPEG-XS codec license
Operating Conditions: Altitude: 650 hPa (3,580 m) to 1,013 hPa (0 m), Humidity: 20% to 80% non-condensing
Storage conditions: Temperature: -40 to 70 degrees Celsius, Altitude: 192 hPa (12,000 m) to 1,020 hPa (-50 m), Humidity: 5% to 95% non-condensing
Rack Units (Height): 1