Meters & Monitoring Equipment : Meters & Monitoring Equipment : Imagine Communications - TVM-4DG

Multiformat HD/SD-SDI Waveform Monitor/Vectorscope

Model: TVM-4DG

Two passive looping HD/SD-SDI inputs with auto-detection of input format
External reference input accepts blackburst or tri-level sync
Simple operation
On-screen display of picture, waveform, vector gamut or timing
Low power consumption

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The TVM-4DG multiformat waveform monitor/vectorscope is an easy-to-operate tool for monitoring HD-SDI (1080 and 720) and SD-SDI (525 and 625) signals and is housed in a convenient half-rack scope package. The display can show any one of the following: waveform, vector, picture or Videotek® patented timing display.

Two passive looping HD/SD-SDI inputs with auto-detection of input format
External reference input accepts blackburst or tri-level sync
Simple operation
On-screen display of picture, waveform, vector gamut or timing
Low power consumption
Convection cooled (no fan)
LED backlit display (no mercury)
GPI control of input and function selection
Standards supported: SMPTE 292M, SMPTE 259M-C

Tester Format - Standalone Component (Box)
Meter/Monitor Type - Video

Connector: 15-pin D-sub female
Connectors: 4 BNC, Hi-Z looping
Control:
Depth: 16.63 in
Display:
Height: 5.25 in
Input Impedance: 10 k ohms returned to +5 V
Power Requirements:
Storage Temperature: -40° to 65° C
Video:
Width: 8.25 in
Power Input: 90 to 260 V AC, 50/60 Hz, nominal
Waveform Accuracy: ±1%
Vector Accuracy: ±1°
Return Loss: =-15 dB, 5 MHz to 1.485 GHz
Operating Altitude: 6562 ft (2000 m)
AC Voltage: 260 Volts
Data Rate: 1.485 Gb/s, 270 Mb/s auto-detect
Humidity: 90% maximum (non-condensing)
Signal Level: NTSC: blackburst 286 mV pk-pk ±6 dB, PAL: sync and burst 300 mV pk-pk ±6 dB and Tri-level: 600 mV pk-pk ±3 dB
Level: 800 mV, nominal
Environmental:
GPI: Input selection, function selection, momentary closure
Reference:
Waveform: YCbCr, RGB, YRGB, Digital as composite
General: Picture, waveform, vector, gamut or timing
Peak Power: 25 Watt
Product Weight: 5 lbs
Sweep Time Base: 1 H, 2 H or 3 H with x1, x5, x10 magnification, 1 V, 2 V or 3 V with x1, x5, x10, x25 magnification
Vector: Cr vs. Cb
INPUT: NTSC/PAL blackburst or composite video, tri-level sync auto-detect (per SMPTE 274M)
Operating Temperature (Maximum): 122 F
Operating Temperature (Minimum): 32 F
Pollution degree: 2
Return Loss.: =-40 dB, 100 kHz to 5 MHz
Inputs A and B (Digital): 1080i/60, 1080i/59.94, 1080i/50, 1080p/30, 1080p/29.97, 1080p/25, 1080p/24, 1080p/23.98, 1080p/30sF, 1080p/29.97sF, 1080p/25sF, 1080p/24sF, 1080p/23.98sF, 720p/60, 720p/59.94, 720p/50, 720p/30, 720p/29.97, 720p/24, 720p/23.98, 525/59.94 or 625/50 auto-detect
Connectors.: 2 BNC, Hi-Z looping
VFLASH: Ethernet port for firmware updates

Waveform Monitor 85 kb - Data Sheet

Project List

AV-iQ Terms and Conditions | | Powered by AV-iQ

Multiformat HD/SD-SDI Waveform Monitor/Vectorscope

Model: TVM-4DG

Suggested Products

Thanks for signing up!