The 7890MG-10GE2 is part of the Evertz family of IP Gateway products, which utilize GE and 10GE networks for video and data transport.
The proliferation of carrier-grade IP networks and their associated capacity, flexibility and cost make them an attractive solution for modern video and data transport networks. Evertz gateway products facilitate the bridge between video and IP worlds, providing the extensive capability, control & monitoring, resilience and low latency demanded by video content creators and transport service providers.
The 7890MG-10GE2 has a dual trunk interface which allows for a full 1+1 redundant link.
The 7890MG-10GE2 provides up to 10 input and output interfaces which can be auto sensed as ASI/SD/HD/3G/GE. To meet SLA requirements, each interface port can also provide automatic, hitless switching between the dual links. In the event of failure or errors of one link, continuity of service remains uninterrupted.
The 7890MG-10GE2 is available in a compact easy to deploy 1RU chassis and a 3RU modular card that can be installed in a 7800 frame to provide high density.
Dual trunk interface, which allow for full 1+1 redundant link
Standard support for 10GE for each interface
Available with optional 1310nm, 1550nm, and CWDM SFP/SFP+ modules Product
Fully hot-swappable from front of frame for low MTTR
Comprehensive signal and card status monitoring via four digit card display or remotely through SNMP and VistaLINK®
Fully integratable with ATP Platform using MAGNUM
Standalone web page for configuration is also available
- Video/GE Interface Ports
- Accommodates any combination of up to 10 ASI/SDI/HD-SDI/3G/GE inputs and outputs within the network interface bandwidth limits
- Auto-Sensing of ASI/SDI/HD-SDI/3G/GE Input/Output Ports
- Hitless Switching (independent per video port) capability between main and backup network paths provides for un-interrupted signal reception when network fault occur