Signal Processing Systems : Converters : Evertz - 7730ADC-HD

HD Component Analog Video to HD SDI Converter

Model: 7730ADC-HD

Three BNCs for YPbPr or RGB input
One sync input BNC for separate sync
Two HD SDI 74.25 or 74.176Mb/s component digital video outputs WITHOUT OSD text or audio bargraphs
One combination output that can either be an extra HD SDI output or composite analog output. When configured as a composite analog output it will be a clean output (no picture), and have the OSD text and bargraph graphics for monitoring
One BNC analog reference input (Tri-level sync, NTSC or PAL-B with same frame rate as input video); 75? or High-Z jumper configurable input impedance

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The 7730ADC-HD line of component analog video to serial digital converters are broadcast quality high definition A to Ds with an extensive list of additional features. High quality analog to digital conversion of audio or AES inputs can be packaged with the video to create an A to D with audio embedder. In addition, Evertz fault monitoring processing will analyze and report video and audio problems via an On-Screen-Display, or remotely via VistaLINK® SNMP.

Three BNCs for YPbPr or RGB input
One sync input BNC for separate sync
Two HD SDI 74.25 or 74.176Mb/s component digital video outputs WITHOUT OSD text or audio bargraphs
One combination output that can either be an extra HD SDI output or composite analog output. When configured as a composite analog output it will be a clean output (no picture), and have the OSD text and bargraph graphics for monitoring
One BNC analog reference input (Tri-level sync, NTSC or PAL-B with same frame rate as input video); 75? or High-Z jumper configurable input impedance
One line video synchronizer
Variable output phase (in clock increments)
Loss of video modes: black, pass
A comprehensive on screen display is available to configure the various features of the module
VistaLINK® capable for remote monitoring, control and configuration capabilities via SNMP; using VistaLINK® PRO, CP-2116E or CP-2232E Control Panels. VistaLINK® is available when modules are used with the 3RU 7800FR frame and a 7700FC VistaLINK® Frame Cont

Converter Signal Types - Video
Converter Type - Analog to Digital Converter
Spec Sheet available - Yes

Analog Video Input - Standard: SMPTE ST 274, SMPTE ST 296 (analog), 1080i/59.94, 720p/59.94, 1080i/50
Analog Video Input - Formats: YPbPr or RGB
Analog Video Input - Number of inputs: 1
Analog Video Input - Connector: BNC per IEC 61169-8 Annex A
Analog Video Input - Signal Level: 1 V nominal
Analog Video Input - Frequency Lock Range: ±75ppm from nominal
Analog Video Input - Control Ranges: Input Level: ±15%; Black Level: ±10IRE
Analog Video Input - Impedance: 75 ohms
Analog Video Input - Return loss: > 30dB up to 30MHz
Video Performance - Inter-channel Delay: < ±5ns
Video Performance - Minimum Delay: 0.5 µs
Video Performance - Maximum Delay: 1 line plus 0.5µs
Serial Video Output - Standard: SMPTE ST 292-1 (SMPTE ST 274, SMPTE ST 296)
Serial Video Output - Number of outputs: 3
Serial Video Output - Connector: BNC per IEC 61169-8 Annex A
Serial Video Output - Signal Level: 800mV nominal
Serial Video Output - DC offset: 0V ±0.5V
Serial Video Output - Rise/Fall Time: 180ps nominal
Serial Video Output - Overshoot: < 10% of amplitude
Serial Video Output - Return Loss: > 13dB to 1.5GHz
Serial Video Output - Embedded Audio: SMPTE ST 299-1
Number of Slots: 1
Input Signal Types: Video
Output (Converted) Signal Type: Video
Active Power: 14 Watt
DC Voltage: 12 Volts
Depth: 14 in
Height: 1.90 in
Width: 4.50 in
Product Weight: 1.50 lbs
Regulatory Compliance: FCC Part 15 Class A, EU EMC Directive

7730ADC-A4-HD - HD Component Analog Video to HD SDI Converter with 4-Channel Analog Audio Converter/Embedder

HD Component Analog Video to HD SDI Converter 86 kb - Data Sheet

Project List