Pro AV Catalog
Evertz  - 7707ET-TE1
Request Quote
All Products
evertz

Ethernet and T1/E1/J1 Fiber Optic Transceiver

Model: 7707ET-TE1

  • 10/100 BaseT Ethernet and T1/E1/J1 fiber optic transceiver
  • Auto negotiation for 10/100 speeds and full/half duplex operation on Ethernet port G.703 compliant T1/E1/J1 port
  • Ethernet and T1/E1/J1 signals completely independent over transport interface
  • Built-in Ethernet switch for isolation of each transmission end
  • Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
The 7707ET-TE1 is a VistaLINK-capable Ethernet and T1/E1/J1 Fiber Transceiver that provides an economical method of transmitting one 10/100 BaseT Ethernet signal and one T1/E1/J1 signal over optical fiber. Monitoring control of card status and parameters is provided locally at the card edge and remotely via VistaLINK. A pair of 7707ET-TE1 transceivers permits full duplex communication of all signals over single or dual optical fibers. The 7707ET-TE1 provides one RJ45 input connector for the 10/100BaseT Ethernet, one RJ45 input connector for the T1/E1/J1 and one or two fiber optic output connectors. Multiple versions of the 7707ET-TE1 are available to address single-mode/multi-mode fiber, single/dual fiber and CWDM/DWDM applications.
  • 10/100 BaseT Ethernet and T1/E1/J1 fiber optic transceiver
  • Auto negotiation for 10/100 speeds and full/half duplex operation on Ethernet port G.703 compliant T1/E1/J1 port
  • Ethernet and T1/E1/J1 signals completely independent over transport interface
  • Built-in Ethernet switch for isolation of each transmission end
  • Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK
  • VistaLINK capable for remote monitoring via SNMP (using VistaLINK PRO) when installed in 7800FR frame with a 7700FC VistaLINK Frame Controller
  • Local display of optical signal strength, link parameters and link status
  • Optical output available in 1310nm, 1550nm and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
  • DWDM wavelengths (ITU-T G.694.1 compliant) also available
  • Supports single-mode and multi-mode fiber optic cable
  • Fully hot-swappable from front of frame
  • SC/PC, ST/PC or FC/PC connector options
 
Request Quote
 
Go to Top