Network Equipment : Related Network Equipment Products : Evertz - 7700TPI

VistaLINK® Third Party Interface Module

Model: 7700TPI

20 opto-isolated General Purpose Inputs (GPI)
Enabled GPI alerts translated and reported to Network Management System (NMS) user interface via SNMP
Selectable +5V or +12V supply for driving GPI over longer cable runs
8 relay closure General Purpose Outputs (GPO)
4 serial ports RS-232/422 selectable

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The 7700TPI VistaLINK® module links third-party equipment and Evertz VistaLINK® Network Management System (NMS). Third-party equipment with fault alarming capabilities via General Purpose Outputs (GPO), serial RS-232/422/485 connection, or Ethernet can communicate fault alarm conditions to the VistaLINK® application software through the 7700TPI to SNMP translator thereby extending fault monitoring capabilities across the broadcast network.The 7700TPI comes equipped with 4 RS-232/422/485 serial ports and 1 10/100 Mb Ethernet port. These ports can also be utilized to communicate and provide remote control to third-party equipment.

20 opto-isolated General Purpose Inputs (GPI)
Enabled GPI alerts translated and reported to Network Management System (NMS) user interface via SNMP
Selectable +5V or +12V supply for driving GPI over longer cable runs
8 relay closure General Purpose Outputs (GPO)
4 serial ports RS-232/422 selectable
GPI/GPO/Serial connections easily accessed through pin-headers (Phoenix Terminal Blocks) on rear plate
Modular, conveniently fits into 7800FR 3RU frame
Module status LED and simple GPI input diagnostics
Frame status trigger
VistaLINK® capable for remote monitoring and control via SNMP (using VistaLINK® PRO) when installed in 7800FR frame - Frame Controller built-in

Spec Sheet available - Yes

Active Power: 6 Watt
DC Voltage: 12 Volts
Number of Inputs: 20
Type: Opto-isolated, active low with jumper selectable +5V or +12V supplied voltage
Connector: Phoenix Terminal Block
Signal Level: Jumper selectable +5V or +12V
Number of Outputs: 8
Number of Ports: 4 RS-232 or 3 RS-422
Baud Rate: User selectable, up to 115200 bps
EMI/RFI: Complies with FCC Part 15 Class A, EU EMC Directive

VistaLINK® Third Party Interface Module 72 kb - Data Sheet

Project List