RCU2S-C2B6™ for the AVer VB342+ and CAM540

Model: RCU2S-C2B6

Extends camera power (no factory camera PSU required), PTZ control, audio and video over CAT5e/CAT6 cable up to 100m.
Simple Plug and Play installation, no programming required.
Allows pass-through of manufacturer firmware updates from codec to camera.
All hardware-specific camera and codec connection cables included.
PowerSniffer included for testing SCTLink™ cable conductor continuity.

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Sound Control Technologies (SCT) USB camera extension kits are designed to streamline the integration of USB PTZ cameras requiring USB and RS232 Visca control. By simplifying complex cabling and extending traditional distance limitations up to 100m, SCT’s extension kits provide integrators with cost and time saving solutions.

Extends camera power (no factory camera PSU required), PTZ control, audio and video over CAT5e/CAT6 cable up to 100m.
Simple Plug and Play installation, no programming required.
Allows pass-through of manufacturer firmware updates from codec to camera.
All hardware-specific camera and codec connection cables included.
PowerSniffer included for testing SCTLink™ cable conductor continuity.
Integrator only required to provide CAT5e/CAT6 SCTLink™ Cable.
Base Kit: Inclusive of RCU2S Modules, Kit Cables and Power Supply
RCU2S-CE Camera Interface Module
PPC-022-0.3M RJ11 (RCU2S-CE) to 5.5mm x 2.1mm DC Power Plug
RCC-M040-0.3M RJ45 (RCU2S-HE™) to 6Pin Mini Din
RCC-M005-0.3M USB-A (RCU2S-HE™) to USB-C
RCU2S-HE Codec/Head-End Interface Module
RCC-M004-1.0M USB-B (RCU2S-HE™) to USB-A
WPS-12 Power Supply

ROHS Compliant - Yes
Warranty - Yes
Spec Sheet available - Yes

Power Consumption: A linked kit will consume 4.5W, plus the power consumption of the attached camera
Video Format: USB Video typically up to 1080p30/720p60
Audio In/Out: 3.5mm TRS Jacks, Stereo Line Level Unbalanced
Color: Black
Warranty (Length/Type): 3 Years
Certifications: UL, CE, FCC, CCC, TÜV, RCM+GEMS, LPS, BIS, PSE, CB, DoE VI, CoC V5 and RoHS2
RCU2S-CE™ Camera End Module: Dimension: H: 0.789 x W: 2.264 x D: 3.725 inch; Weight: 0.2 lbs/90g
RCU2S-HE™ Head End Module: Dimension: H: 1.448 x W: 3.814 x D: 3.578; Weight: 0.4 lbs/181g
WPS-12™ Power Supply (Included): Dimension: H: 1.19 x W: 1.85 x D: 4.65 inch; Weight: 0.5 lbs / 236g; Input: 100 to 240VAC, 47-63Hz, 1.45A Max; Output: 30VDC, 2A Max; Output Connector: 5.5mm x 2.5mm DC Barrel
VISCA Control Loop: Daisy Chain Configuration with up to 7 cameras
SCTLINK™ CABLE SPECS: SCT recommends CAT6 or better cable for the SCTLink™. The use of a shielded cable, while not required for most platforms, is highly recommended. Proper termination and testing, along with good cable management, minimizes potential problems
USB Tier Usage: 1 tier (hub) per linked set
VISCA Loop Connector (RCU2S-CE™): RJ11 Female for Data or Power (12V or 5V Camera Power up to 3A)
VISCA Loop Connector (RCU2S-HE™): 8-Pin Mini DIN Female
Power/Control/IR Connector (RCU2S-CE™): RJ45 Female
Control/IR Connector (RCU2S-HE™): 9-Pin D-Sub Male
USB Connector (RCU2S-CE™): USB-A for Data and 5V Camera Power up to 1.2A
USB Connector (RCU2S-HE™): USB-B 2.0 for Host Connection
Wiring Termination: Standard T568A or T568B 100m Maximum Length (No Minimum Length)

Kit 570839 kb - Data Sheet

Project List