Fiber Optic Systems : Fiber Optic Converters : Evertz - 7707EO-3-HD

19.4Mb/s to 1.485Gb/s Triple HD Electrical to Optical Converter

Model: 7707EO-3-HD

Three independent channels of electrical to optical conversion that support all SMPTE ST 292-1 standards at 1.485Gb/s
Supports all SMPTE ST 259 standards with operation from 143Mb/s - 360Mb/s
Supports additional standards of SMPTE ST 305 (SDTi), SMPTE ST 310 (19.4Mb/s), SMPTE ST 344 (540Mb/s), M2S and DVB-ASI (270Mb/s)
Automatic cable equalization to 300m at 270Mb/s and 75m at 1.485Gb/s with Belden 1694A (or equivalent) cable
Fully hot swappable from front of frame, with no fiber or BNC disconnect /reconnect required

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Three independent channels of electrical to optical conversion that support all SMPTE ST 292-1 standards at 1.485Gb/s. Supports all SMPTE ST 259 standards with operation from 143Mb/s - 360Mb/s. Supports additional standards of SMPTE ST 305 (SDTi), SMPTE ST 310 (19.4Mb/s), SMPTE ST 344 (540Mb/s), M2S and DVB-ASI (270Mb/s).

Three independent channels of electrical to optical conversion that support all SMPTE ST 292-1 standards at 1.485Gb/s
Supports all SMPTE ST 259 standards with operation from 143Mb/s - 360Mb/s
Supports additional standards of SMPTE ST 305 (SDTi), SMPTE ST 310 (19.4Mb/s), SMPTE ST 344 (540Mb/s), M2S and DVB-ASI (270Mb/s)
Automatic cable equalization to 300m at 270Mb/s and 75m at 1.485Gb/s with Belden 1694A (or equivalent) cable
Fully hot swappable from front of frame, with no fiber or BNC disconnect /reconnect required
High density - accommodates up to 45 independent channels of optical conversion, in a single 3RU frame
Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK capability
Detection and display of input cable length
Operation with multi-mode or single-mode fiber
SC/PC, ST/PC or FC/PC connector options
Tally output on Frame Status bus upon loss of input signal
VistaLINK capable for remote monitoring via SNMP (using VistaLINK PRO) when installed in 7800FR frame with a 7700FC VistaLINK frame controller

Spec Sheet available - Yes

Certifications: FCC
Active Power: 6 Watt
DC Voltage: 12 Volts
Regulatory Compliance: EU EMC

7707EO - 19.4Mb/s or 143-540Mb/s SDI Electrical to Optical Converter

7707EO-3 - 19.4Mb/s or 143-540Mb/s Triple SDI Electrical to Optical Converter

7707EO-DS3 - DS3 Electrical to Optical Converter

Triple HD Electrical to Optical Converter 63 kb - Data Sheet

Project List