Stands : Microphone Stands : DPA Microphones, Inc. - MMP-F30

MMP-F30

Series: Gooseneck Microphones

Model: MMP-F30

30cm (300mm) boom length
19mm (0.75 in) diameter
XLR-3M Pin 1: shield, Pin 2: signal + phase, Pin 3: - phas output connector
15Hz low-cut frequency (-3dB)
0.6 µV noise with shorted input, A-weighted

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Equipped with state-of-the-art preamplifier design and sleek appearance, you can combine this preamplifier with any modular capsule in the Microphones Series. Excellent radio frequency rejection is obtained through the DPA-designed impedance balancing with active drive.

30cm (300mm) boom length
19mm (0.75 in) diameter
XLR-3M Pin 1: shield, Pin 2: signal + phase, Pin 3: - phas output connector
15Hz low-cut frequency (-3dB)
0.6 µV noise with shorted input, A-weighted
2.2V output voltage, RMS
3.1V output voltage, peak
Active type of electronic circuit
< 0.2 % THD at 1VRMS, 1kHz
131dB dynamic range
100 ohms output impedance
2 kohms minimum load impedance

Impedance: 100 ohm
DC Voltage: 48 Volts
Dynamic Range: 131 dB
Cable Length: 328.08 ft
Operating Temperature (Maximum): 113 F
Operating Temperature (Minimum): -40 F
Height: 11.81 in
Shipping Height (with packaging): 4 in
Shipping Width (with packaging): 12 in
Shipping Weight: 2 lbs
Shipping Depth (with packaging): 8 in
Color: Black

Suggested Products

Table stand for gooseneck microphones (Black)

by Sennheiser