Wall Dock for TST-902

Model: TST-902-DSW

Part #: 6504583

Optional wall dock for the TST-902 Wireless Touch Screen
Placing the touch screen into the wall dock enables its use as a stationary touch screen while simultaneously charging its internal battery
When docked in the TST-902-DSW, the touch screen sits nearly flush with the outer bezel, affording a clean appearance while inhibiting unauthorized removal
By entering a passcode or pressing a button on the touch screen, the mechanism gently tilts the touch screen outward, allowing it to be released for wireless use
A hardware key is included to release the touch screen in the event of a power failure

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The TST-902-DSW is an optional wall dock for the TST-902 Wireless Touch Screen. Placing the touch screen into the wall dock enables its use as a stationary touch screen while simultaneously charging its internal battery.
When docked in the TST-902-DSW, the touch screen sits nearly flush with the outer bezel, affording a clean appearance while inhibiting unauthorized removal. By entering a passcode or pressing a button on the touch screen, the mechanism gently tilts the touch screen outward, allowing it to be released for wireless use. A hardware key is included to release the touch screen in the event of a power failure.
The TST-902-DSW is designed for flush-mount installation in a flat, vertical wall structure.[1]Installation requires additional hardware (sold separately). Pre-construction back boxes are available for both framed and masonry construction. Pre- and post-construction mounting kits are also available for applications that do not require a back box.

Optional wall dock for the TST-902 Wireless Touch Screen
Placing the touch screen into the wall dock enables its use as a stationary touch screen while simultaneously charging its internal battery
When docked in the TST-902-DSW, the touch screen sits nearly flush with the outer bezel, affording a clean appearance while inhibiting unauthorized removal
By entering a passcode or pressing a button on the touch screen, the mechanism gently tilts the touch screen outward, allowing it to be released for wireless use
A hardware key is included to release the touch screen in the event of a power failure
Designed for flush-mount installation in a flat, vertical wall structure
Installation requires additional hardware (sold separately)
Pre-construction back boxes are available for both framed and masonry construction
Pre- and post-construction mounting kits are also available for applications that do not require a back box

Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 112 F
Operating Temperature (Minimum): 41 F
Active Power: 11 Watt
Current Draw: 0.46 Amps
DC Voltage: 24 Volts
Depth: 3.20 in
Height: 8.02 in
Width: 11.86 in
Product Weight: 5 lbs
Warranty (Length/Type): 3 Years Limited
Connectors:
•24 VDC: (1) 2-pin 3.5mm detachable terminal block
•24 Volt DC power input
• Wire Size: 18 AWG (0.75 mm2) maximum
Controls:
•OPEN: (1) pushbutton, accessible when touch screen is not docked
•Releases the docking mechanism to allow touch screen to be docked
Environmental:
•Humidity: 10% to 90% RH (non-condensing)
•Heat Dissipation: 38 BTU/hr (including touch screen)
Enclosure:
•Chassis: metal, flush-mountable in a vertical wall structure[1] (all mounting accessories sold separately)
•Faceplate: plastic, black
Notes:
•1. The TST-902-DSW docking mechanism is designed for proper operation when mounted in a vertical orientation as in a typical wall. The maximum allowable tilt is 16° back. The mechanism will not eject properly at an angle greater than this.

TST-902-DSW-WMKM - Post-Construction Wall Mount Kit with Mud Ring for TST-902-DSW

Wall Dock 744 kb - Data Sheet

Project List